DualCool™ CP1 — ARCA Rail Edition

Product Short Description:

The DualCool™ CP1 — ARCA Rail Edition combines the DualCool dual-layer thermal system with an integrated ARCA rail and centered M-LOK slots, plus native RRS and Area 419 compatibility. 3D-printed in aerospace-grade A20x for precision-rifle strength. Available for AR-10 and AR-15. Only Available in a 15 Inch configuration.

Product Description

DualCool™ CP1 — Dual-Layer ARCA Handguard for AR-15 & AR-10

The DualCool™ CP1 ARCA Rail Edition is the only dual-layer ARCA handguard built for both AR-15 and AR-10 platforms. Designed for precision shooters, it combines advanced thermal control with an integrated ARCA interface for unmatched stability, repeatability, and performance.

Precision ARCA Handguard with Dual-Layer Cooling

The DualCool™ CP1 was engineered to solve the problem every shooter faces — heat. Its dual-layer construction and engineered air-gap thermal barrier keep the outer shell cooler during sustained fire while accelerating cooldown between shot strings. This makes it one of the most advanced ARCA rail handguards available.

Dual-Layer Thermal Barrier Technology

Why a Dual-Layer ARCA Handguard Stays Cooler

Unlike traditional single-layer aluminum rails, the DualCool™ CP1 separates the inner and outer shells with a thermal air gap. Heat is absorbed and managed by the inner shell while the outer surface remains cooler and safer to grip.

Air Gap Design for Faster Cooling

The engineered space between shells doesn’t just slow heat transfer — it promotes faster cooling. Your rifle returns to a workable temperature sooner, whether you’re on the range or in competition.

Integrated ARCA Rail for Precision Rifles

The integrated ARCA rail along the bottom delivers a rock-solid mounting solution for bipods, tripods, and precision shooting accessories. Unlike bolt-on rails, the ARCA system is built into the handguard for superior rigidity and perfect alignment.

ARCA Rail with Centerline M-LOK

M-LOK slots run down the centerline of the ARCA surface, allowing additional accessories to be mounted without sacrificing stability or rail strength.

Native RRS & Area 419 Compatibility

The DualCool™ CP1 ARCA edition is dimensioned and scalloped for both RRS and Area 419 systems. No adapters. No extra hardware. Direct, repeatable lock-up.

CP1 Alloy Advantage

The DualCool™ ARCA Edition is precision 3D-printed in CP1 aerospace alloy — a material engineered for high strength, excellent thermal stability, and outstanding durability in demanding environments. CP1 provides superior rigidity, controlled heat behavior, and exceptional corrosion resistance, making it ideal for precision AR-15 and AR-10 applications.

Stronger Than Standard Aluminum Handguards

CP1 delivers an excellent strength-to-weight ratio, offering the performance of advanced aerospace materials without unnecessary mass.

Optimized for Additive Manufacturing

Unlike conventional alloys, CP1 is highly compatible with metal additive manufacturing. This allows the DualCool™ structure to incorporate AI-engineered internal geometry that improves rigidity, weight balance, and heat control — designs impossible to achieve through traditional machining.

Platforms & Applications

AR-15 ARCA Handguard

Engineered for competition and serious training, providing faster cooldown and precision mounting capability.

AR-10 ARCA Handguard

Purpose-built for long-range platforms where stability, thermal control, and repeatable mounting are critical.

Specs & Pre-Order Information

Construction: Dual-layer CP1 alloy, 3D-printed
Rail: Integrated ARCA with centerline M-LOK
Mounting: Native RRS & Area 419 compatibility
Platforms: AR-15 & AR-10
Finish: Anodized / Cerakote options

Availability: Pre-order now — ships May 2026

Standard aluminum handguards heat faster, cool slower, and often require external ARCA adapters. The DualCool™ CP1 ARCA Edition eliminates those compromises.

DualCool Advantages

Built-In Thermal Defense

The DualCool™ CP1 features a true dual-layer construction: an inner shell that absorbs and channels heat from the gas block, and an outer shell separated by an engineered air gap. This barrier slows heat transfer to the surface your hand touches, keeping it cooler during long strings of fire and allowing it to shed heat far faster once firing stops.

Integrated ARCA Rail

The DualCool™ CP1 ARCA Rail Edition is the only handguard to feature an integrated ARCA rail that’s natively cut for both RRS and Area 419 systems. By machining the dimensions and scallops directly into the rail, it eliminates the need for adapter plates, reduces weight, and keeps your rifle lower and more stable on bipods or tripods. The result is faster setup, repeatable accuracy, and rock-solid mounting for serious precision shooters.

CP1 Alloy Advantage

CP1 is a next-generation aerospace alloy known for its exceptional strength-to-weight ratio, outstanding corrosion resistance, and resilience in demanding environments. It withstands heat better than traditional aluminum rails and transfers less thermal energy to the shooter’s hand, enhancing comfort during extended fire. Combined with our dual-layer thermal barrier design, CP1 delivers a lighter, tougher, cooler-running handguard built for serious use.

Comparison Table

Feature	DualCool™ CP1 — ARCA Rail Edition	DualCool™ CP1 (Standard)	Standard Aluminum Handguard
Construction	Dual-layer CP1 alloy w/ engineered air gap + integrated ARCA rail	Dual-layer CP1 alloy w/ engineered air gap + integrated grip texture	Single-layer aluminum extrusion
Bottom Rail	Integrated ARCA rail + centerline M-LOK slots	Open exterior w/ integrated grip texture	Optional rail or low-profile bottom
RRS / Area 419	Native compatibility (precision-scalloped)	Not natively supported	Requires adapters
Grip Texture	Smooth outer profile (precision-oriented)	Integrated 3D-printed texture	Smooth or add-on panels
Thermal Management	Dual-layer thermal barrier w/ thermal air gap	Dual-layer thermal barrier w/ thermal air gap	Single-layer; heats faster
Target Use	Precision rifle / ARCA tripod + bipod systems	Tactical / training / general duty use	General purpose
Platforms	AR-10 & AR-15	AR-15 (additional platforms in development)	AR-15 / AR-10 (varies by manufacturer)
Availability	Pre-order now — ships May 2026	Pre-order now — ships May 2026	Widely available

What is CP1?

The DualCool™ CP1 Handguard is built from CP1, a next-generation aerospace alloy developed for applications where structural strength, thermal stability, and lightweight performance are mission-critical. When combined with advanced metal 3D printing, CP1 provides unique advantages specifically suited for precision firearm components.

Key Benefits of CP1

High Strength-to-Weight Ratio – Delivers excellent structural strength while remaining lightweight, providing durability and rigidity without unnecessary mass — ideal for high-performance rifle builds.

Thermal Stability – Handles sustained heat and repeated thermal cycling while reducing transfer to the outer shell, making it an ideal material for a dual-layer cooling system.

Optimized for 3D Printing – Performs exceptionally well in additive manufacturing, enabling the DualCool™’s AI-engineered internal geometry to be printed with precision and complexity that cannot be achieved through traditional machining.

Corrosion & Wear Resistance – Naturally resistant to environmental degradation and surface fatigue, with anodize and Cerakote options available for additional protection and longevity.

Aerospace Heritage – Used in advanced engineering and aerospace environments where reliability under extreme stress is essential — now applied to firearm performance.

With CP1, the DualCool™ handguard isn’t just innovative in design — it’s built from a material engineered for demanding, real-world conditions.

FAQ – DualCool™ CP1 ARCA Handguard

Q: What is the ARCA Rail Edition?
A: The DualCool™ CP1 — ARCA Rail Edition integrates the DualCool dual-layer thermal management system with a precision-machined ARCA interface that runs the full length of the handguard. The lower rail incorporates centerline M-LOK slots without compromising structural rigidity, creating a rigid, thermally stable platform optimized for precision shooting, positional stability, and repeatable mounting under load.

Q: Will the ARCA rail fit my RRS or Area 419 mount?
A: Yes. The ARCA Rail Edition is purpose-dimensioned to meet RRS and Area 419 interface standards, featuring scalloped geometry and tolerance-controlled rail surfaces to ensure positive lock-up, consistent clamping force, and repeatable positioning without adapter plates. Compatibility applies to properly spec’d RRS and Area 419 mounts; users should confirm individual mount specification if heavily modified or non-standard.

Q: Does this version include the integrated grip texture?
A: No. The ARCA Rail Edition intentionally omits the integrated texture to maintain a uniform, repeatable external geometry and reduce micro-variances in contact surfaces. This ensures consistent tripod, bipod, and clamp engagement while eliminating any potential surface intrusion that could influence precision mounting alignment or torque distribution.

Q: Which platforms is the ARCA Rail Edition offered for?
A: The ARCA Rail Edition is engineered for both AR-15 and AR-10 platforms. Multiple length options will be offered to align with precision rifle build requirements, ensuring proper balance, fore-end leverage, and mounting real estate without introducing unnecessary mass.

Q: Is the thermal performance the same as the standard DualCool?
A: Yes. The ARCA Rail Edition employs the same dual-layer CP1 alloy architecture and engineered thermal air gap as the standard DualCool system. Heat is primarily absorbed and distributed through the inner structural shell while the isolating air barrier reduces conduction to the outer shell. This limits heat soak, slows external surface temperature rise, and promotes faster cooldown between strings — now combined with precision mounting capability.